I have the following egas parts available removed from a non runner
4 cylinder ecu
Map sensor
Switch
Matrix injectors, resistance test is ok
The owner said the system ran fine before the head gasket failed. Parts sold as seen with no warranty as I was not able to test them. Wiring loom is there but only the plugs are salvageable.
£50 including delivery for the lot but may split. The injectors should be worth the asking price alone.
E gas spare parts
-
- Installer
- Posts: 2589
- Joined: Fri Oct 21, 2005 8:56 pm
- Location: North Wales
- Contact:
E gas spare parts
http://www.classicswede.co.uk/LPG/cat17 ... 10800.aspx
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
Re: E gas spare parts
I bought your last lot of injectors you sold on here and they worked well mate!
Which type of Matrix injector are these?
I also have an Egas reducer (which Gilbert never confirmed he wanted or could have had for nowt) and map sensor.. I sold the working ECU and switch to a German many months ago for about the same price as you're asking for a full system.. You might get more for that lot!
Simon
Which type of Matrix injector are these?
I also have an Egas reducer (which Gilbert never confirmed he wanted or could have had for nowt) and map sensor.. I sold the working ECU and switch to a German many months ago for about the same price as you're asking for a full system.. You might get more for that lot!
Simon
Full time LPG installer
Servicing / Diagnostics / Repairs to all systems / DIY conversion kits supplied with thorough tech support
Mid Yorkshire
2 miles A1, 8 miles M62,
http://www.Lpgc.co.uk
Twitter https://twitter.com/AutogasSimon
07816237240
Servicing / Diagnostics / Repairs to all systems / DIY conversion kits supplied with thorough tech support
Mid Yorkshire
2 miles A1, 8 miles M62,
http://www.Lpgc.co.uk
Twitter https://twitter.com/AutogasSimon
07816237240
-
- New member
- Posts: 60
- Joined: Wed Apr 03, 2013 6:38 pm
Re: E gas spare parts
Do you by any chance still have the egas ecu. Do you know if the egas 8 cylinder ecu will programme as a 4 cylinder ?
John
John