Nissan Skyline 350GT converted by LPGC

[LPGC]

Simon, any luck with getting pictures from photo bucket?
I try 3/4 times every week but can't get any pictures back/download from them!

Hi Simon, Haven't tried recently, straight back into being busy since I got back from holiday. Last time I tried it seemed I could get them if I only asked to be sent a couple at a time.

Edit, just occurred to me to ask... Are you after a pic I took of your car?

Simon

[Gilbertd]

I found that you seem only to be able to download an album but it puts up a fight if you try to download pictures that are just in your folder. I created an album, moved pictures into that and then downloaded the album.

[LPGC]

I found that you seem only to be able to download an album but it puts up a fight if you try to download pictures that are just in your folder. I created an album, moved pictures into that and then downloaded the album.

I think what's going on is that it'll email pics in the folder selected but not include pics from subfolders. I have about 10 subfolders to the route folder including one named LPGC to store pics of vehicles I converted. But the LPGC folder has no pics itself, I set up a subfolder within LPGC for each vehicle... so it could take a while for me! It would be far easier if PB emailed a zipfile keeping the same PB folders structure and every pic in them.

[57jam89]

Hi simon,
Thanks for info on getting pictures back, i have had no joy.

I've got to replace the filler point on my car this weekend as both of the pins broke off. I did have trouble connecting up a nozzle the other day (it must of been faulty) which was a place i haven't visited before. Then used my local one which snapped the pins straight off.

[LPGC]

Hi Simon,

All go here... Today (Sunday) had a Merc ML63AMG picked up, one I repaired for a guy from down South, been working on finishing conversion of a VW van, customer dropped a Nissan Elgrand off for conversion and I have another Elgrand being dropped off for conversion on Wednesday. Still haven't got my pics back, or had time to do much else besides work!

Oh dear regards the filler... I'm trying to picture what combination of factors could have caused that, was the faulty one particularly tight to put on or something?

Simon

[57jam89]

Hi Simon,
Sounds like your well busy!

Yes one filler/nozzle I used just didn't fit/go on properly, it could of been faulty (or maybe it was me) and i think this may of bend one of the pins.
Anyway I got a new one from tinley tech so it's fine now.

Thanks.

[57jam89]

Hi Simon, i did text you to try to sort out come up over Christmas period to sort my problems.

[LPGC]

Yeh, good job we managed to arrange the date in the end and before I'd read your post here... although I did say back in November we'd be able to arrange a date over Xmas, only missed your call due to having dinner with my young daughter that Saturday, delayed replying to your txt by a day when my laptop screen was broken and it made more sense to reply when I could see me schedule.

[57jam89]

Hi, See you 10 a.m on wed 2nd Simon. Thanks

[57jam89]

Hi Simon, I forgot to ask on the phone, do you want me to drill the nozzles out to 3mm before I come up? Or do you want to see/feel the problem before drilling the nozzles?

[LPGC]

Can do Simon, might be a head start with progress on the Wed.
Cheers, Simon

[57jam89]

Ok i will drill them out and drive up on petrol.
Also today i connected my laptop up before going out with the wife so she could watch it and also had the obd reader plugged in. 1st heavy bit of throttle and it was misfiring and lpg pressure didn't drop and everything on software looked normal. Also volts from 02 sensors were normal and no pending fault codes.
But I did notice it sort of pops/bands then misfire heavy from then onwards.

So I'm totally lost on what is causing misfire!

See you Wednesday. Thanks