LPG Discussion Forum

hi my car is an audi a6 2.4 v6 it does seem the internal relay was the problem. What put me off doing the relay was how lumpy it ran when hotwired. the ecu I got was less than postage cost and I thought its worth a risk. the relay thing is something id have to learn, much of the lpg stuff is my firs...

hi
i took the car out 40 mile journey and it ran well on gas it never flickered.
i could smell a bit of gas at the front reducer.i have a new one that i will fit soon.
the error says LPG pressure too low.
p work 1.14
p min 0.68

i added photos

hi just to update and thank all who helped I done voltage test on the ecu to solenoid wires, it read under 5v. I got the chance to buy a cheap replacement ecu from Poland and thought its worth a risk I copied all the old settings off damaged ecu set off the calibration and got a nice "calibration wa...

when hotwired the solenoids have a constant 12v and it runs on gas.
if I hot wire the solenoids without the wires coming from ecu to solenoids. Get it running on gas, should I get a reading from the ecu wires that should be connected to solenoid?

I put a volt meter between the two wires that feed solenoid zero voltage? when I wire the solenoids as they are meant to be wired and hotwire the live, lpg kicks in and runs fine. its not lumpy like before(I have changed rear solenoid and plunger since last test when it was lumpy) am I testing for v...

all it says is... voltage error
says the same error message 1 to 48 times
I will re check all the fuses and wires

cant believe it the adapter 7 for cable I bought was wired wrong ccl.pl emailed me back after I sent photos saying "Ok now we know everything, it's our fault . The adapter is mistaken for two cables - brown with white on the white cube. In my photo is shown what it should look like. This change coul...

bit of a pain but I will rig my pc up next to my car and give it a go

I TRIED WITH AN OLDER LPG CABLE and got same results below is a copy from my pc.. note on com3 it has a different message but it was not the assigned com port for the cable com4 is assigned with the cable but still 0 files copied? the drivers were downloaded from the website where I bought the inter...

I notice in you command prompt picture it says 1 files copied on com5 so your computer knows the cable is present
even on my pc it never recognises the cable as it wont copy a file on any com port

just says 0 files copied

because my pc is showing same message in command prompt as brian h
im tempted to move it next to my car to try.
is it likely my laptops are the problem and my pc will weork?

found this but it https://support.solarwinds.com/Success_Center/Server_Application_Monitor_(SAM)/Knowledgebase_Articles/Error_The_I_O_operation_has_been_aborted_because_of_either_a_thread_exit_or_an_application_request when I tried solution it says.. the syntax of the command is incorrect I copied a...

difference is my pc is windows 10 both laptops windows 7

administrator command prompt is same

my other laptop says the same ….the i/o operation has been aborted because of either a thread exit or an application request 0 files copied

on my pc I get exactly the same message as your photo
but my laptop says ….the i/o operation has been aborted because of either a thread exit or an application request 0 files copied

it just takes me back to c:\users\user

hi
I opened command prompt c:\users\user typed Copy con com1 pressed ctrl-c on the keyboard
resulted in c:\users\user appearing below

its windows 7 32bit usb i.1 or usb2 too old for usb3
I just got a sony laptop with i7 cpu so I assume its got usb 2 or 3 will give it a try in the morning