Search found 9 matches

by keeperlit
Fri Aug 05, 2022 12:14 am
Forum: General Discussion
Topic: lead pellets in tank?
Replies: 4
Views: 129

Re: lead pellets in tank?

Thanks!
by keeperlit
Sun Jul 17, 2022 9:24 pm
Forum: General Discussion
Topic: lead pellets in tank?
Replies: 4
Views: 129

lead pellets in tank?

Hi all, When checking my used tank before fitting I noticed something rattling around the inside of it. I drained it and removed the valve to find it intact and what looks like a load of lead pellets in a metal gauze wrapper :shock: I guess thing is to prevent rust in the tank or help save valve sea...
by keeperlit
Wed Jun 22, 2022 2:06 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

Found a blown fuse (actuator supply 15A - wrong fuse 5A had been used) and now all injectors relays and coils seem to be working when doing the BRC actuators test. Just need a Changeover switch, MAP sensor, some injector piping, nozzles and injector harnesses. Found loads of PDFs online which helped...
by keeperlit
Wed Jun 22, 2022 1:56 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

Turns out my cheap Vagcom cable works with the BRC software and sequent ECU by using the +12v, ground and K-Line pins on the Vagcom OBD adapter connected to the 3 diagnostic pins on the sequent ECU, that saved a few quid on an adapter!
by keeperlit
Mon May 30, 2022 10:06 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

To calibrate it you may also need the BRC calibration time pressure sensor if there is no map sensor with the Seq56 system. The kit just arrived and what I thought was a MAP sensor is actually just an injector rail pressure sensor. The BRC calibration sensor looks quite expensive, and I do have a s...
by keeperlit
Sat May 28, 2022 6:31 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

Thanks for the tank advice. My car has loads of space around the wheel well on one side (opposite side to the exhaust) thankfully, should be able to run the existing polypipe and cables up to the engine bay beside the existing fuel and brake lines as they're on that side too. Ah, the need for sealin...
by keeperlit
Mon May 23, 2022 2:31 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

Looks like you've got a fair idea about the plumbing etc. To calibrate it you may also need the BRC calibration time pressure sensor if there is no map sensor with the Seq56 system. Great point, I have no idea about how that works. But I do have MAP sensor in the pile of BRC kit. :-) My car has an ...
by keeperlit
Mon May 23, 2022 1:07 pm
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Re: Belfast - guidance on a first time BRC DIY install

So far I've got: - Atrama 55l 0 degree tank with Tomasetto AT02 valve - BRC Sequent 56, taken from a BMW straight 6 (https://www.ebay.co.uk/itm/185432060913) - BRC Genius Max reducer - MTM rail with 6 injectors Looks like to complete I need: - BRC changeover switch - High pressure pipe (I have a fle...
by keeperlit
Mon May 23, 2022 9:51 am
Forum: Find an LPG Professional
Topic: Belfast - guidance on a first time BRC DIY install
Replies: 13
Views: 1481

Belfast - guidance on a first time BRC DIY install

Hi all, I've been dying to do an autogas conversion for years, finally doing it on my 2002 MG ZS V6. Using a second hand BRC kit, but would like help to bounce ideas off and someone to check out my work and make sure it's safe.

Keith